LP 300 NITROX ROTARY
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
SIDEMOUNT SMS 100 REGULATOR KIT
COMPLETE ADJUSTABLE HARNESS + KNIFE
LP 600 NITROX ROTARY
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
copy of COMPLETE ADJUSTABLE HARNESS + KNIFE
SIDEMOUNT REGULATOR KIT
TEK3 REGULATORS SET
Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!
BASIC HARNESS
FILLING PANEL FOR COMPRESSOR
It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).
BASIC DIR HARNESS
FILLING PANEL FOR COMPRESSOR WITH CAMS
Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.
XTX 200 REGULATOR DIN
ELITE 2 HARNESS
XTX 50 REGULATOR DIN
SOLO HARNESS
MOLECULAR SIEVE
500SE DC7 REGULATOR DIN
SHOULDER-PADS (Pair)
Comfortable shoulder pads. Material:Cordura 1100, polyethylene foam. Weight: 0,05 kg
ACTIVATED CARBON
Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.
BLACK WEIGHT POCKET 2.3 KG UNIT
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.